When setting up your new network you have two basic choices: fiber or copper. Both offer superior data transmission. The decision on which one to use may be difficult. It will often depend on your current network, your future networking needs, and your particular application, including bandwidth, distances, environment, and cost. In some cases, copper may be a better choice; in other situations, fiber has big advantages.
Fiber optic cable is becoming one of the fastest-growing transmission mediums for new cabling installations and upgrades, including backbone, horizontal, and even desktop applications. Fiber optic cable is favored for applications that need high bandwidth, long distances, and complete immunity to electrical interference. It’s ideal for high data-rate systems such as Gigabit Ethernet, FDDI, multimedia, ATM, SONET, Fiber Channel, or any other network that requires the transfer of large, bandwidth-consuming data files, particularly over long distances. A common application for fiber optic cable is as a network backbone, where huge amounts of data are transmitted. To show the comparison here is a chart.
|BANDWIDTH||MAX. IS 1 GIGABIT||10 GIGABIT AND CLIMBING|
|FUTURE NEEDS||CAT 7 IS STILL BEING DEFINED||VERY EXPANDABLE AND IS EVOLVING|
|DISTANCE||100 METERS @ 1000 Mbps||40 km+ @ 10,000 Mbps|
|NOISE||Negative response to EMI/RFI and Voltage surges||No Effect|
|SECURITY||Easily tapped into||Almost impossible to tap|
|PULL-STRENGTH||25 pounds||100-200 pounds|
50 vs. 62.5 micron cable.
Although 50-micron fiber cable features a smaller core, which is the light-carrying portion of the fiber, both 62.5- and 50-micron cable feature the same glass cladding diameter of 125 microns. You can use both in the same types of networks, although 50-micron cable is recommended for premise applications: backbone, horizontal, and intrabuilding connections, and should be considered especially for any new construction and installations. And both can use either LED or laser light sources.
The big difference between 50-micron and 62.5-micron cable is in bandwidth-50-micron cable features three times the bandwidth of standard 62.5-micron cable, particularly at 850 nm. The 850-nm wavelength is becoming more important as lasers are being used more frequently as a light source.
Other differences are distance and speed. 50-micron cable provides longer link lengths and/or higher speeds in the 850-nm wavelength. See the Chart below.
|62.5/125 um||500 meters||220 meters||160 Mhz/km|
|50/125 um||500 meters||500 meters||500 Mhz/km|
Click here to enter our fiber optic products in our online catalog.