Description
Our Ethernet™ transceiver family is IEEE 802.3 compliant and provides a complete interface of the AUI port to one of three types; Thin Ethernet™ NEW0230, Fiber Optic NEW0370, or 10Base-T NEW0530.
A complete set of LEDs indicate the diagnostic status between your Ethernet™ devices and cabling systems. The compact design make it flexible for use in a variety of networking devices. NEW0370 supports full/half duplex mode that can be operated between switches, routers, and servers in full duplex transmission.
Key Features
- Comply with IEEE 802.3 standard
- Support network traffic at a rate of 10Mbit/sec
- NEW0370 supports full/half duplex mode transmission
- Support Ethernet™ configuration using CSMA/CD access method based on IEEE 802.3 standard
- Compact design
SPECIFICATIONS
| NEW0230 | NEW0530 | NEW0370 | |
| Standard | IEEE 802.3 10Base2, IEEE 802.3 10Base5 |
IEEE 802.3 10Base-T, IEEE 802.3 10Base5 |
IEEE 802.3 10Base-FL, IEEE 802.3 10Base5 |
| Connectors | BNC female, AUI DB-15 male |
Shielded RJ45 jack, AUI DB-15 male |
Multimode Fiber ST, AUI DB-15 male |
| Cable | BNC RG-58 A/U coaxial cable (L0325, 185m max.) AUI drop cable (M0421-2M, 50m max.) |
UTP Cat 3 (or Cat 5) cable (L60458, 100m max.) AUI drop cable (M0421-2M, 50m max.) |
850nm, 62.5/125um Multimode fiber (L8100-03M, 2 km max.) AUI drop cable (M0421-2M, 50m max.) |
| LEDs | Power | Power, transmit, receive, Collision, polarity reverse, and link | Transmit, receive, link, and collision |
| Special Features |
Selectable terminator, selectable SQE test |
Selectable link test, selectable SQE test |
Full/half duplex switch, selectable SQE test |
| Duplex Type | Half | Half | Full/Half selectable |
| Environment | Temperature: 0 to 50 degrees Celsius, Relative Humidity: 10% to 90% non-condensing | ||
| Dimension | 42 mm x 65 mm x 20 mm (1.65 x 2.56 x 0.79 inch) | ||
| Input Current | +12VDC, 250mA max. | ||
