28 Gauge 20 Pair Twisted Pair .05 Inch Pitch Ribbon Cable

Description

This ribbon wire works for mass termination. The twist and flat structure allows the signal to go a few feet further then on a regular flat ribbon. Exact distances will vary with type of signal. The flat sections are 19.5 inches apart. Connector spacing will be in multiples of 19.5 inches.

Impedance	Capacitance	Conductor size
122 ohms	16 pf/ft	28 AWG (7×36)

The connectors typically used on this wire are ID40F and/or CE40F. This ribbon cable is .05 inch pitch, a typical connector would be two row .1 inch pitch, see CAB040-RI for .05 pitch economy flat unshielded ribbon with same number of conductors. This low grade cable is not able to work with the new Ultra ATA drives, for Ultra ATA, see our CAB080-RH.