VGA Extender using Cat 5 Cable up to 300 feet designed for Projectors

$245.00

VGA Extender using Cat 5 Cable up to 300 feet designed for Projectors

Out of stock

Description

The ADP5210A allows VGA to be sent over Cat 5e or Cat 6 twisted pair cable. Transmissions can reach up to 91 Meters (300 feet) (see chart below). Shielded Cat 5 cables are recommended Click Here to see our selection of Shielded Cat 5 cables. The receiver can be adjusted with screwdriver for best picture.

 

50 ft. 100 ft. 150 ft. 200 ft. 250 ft. 300 ft.
640×480 @60 Hz Excellent Excellent Excellent Excellent Excellent Excellent
800×600 @60 Hz Excellent Excellent Excellent Excellent Excellent Fair
1024×768 @60 Hz Excellent Excellent Excellent Excellent Fair Fair
1280×1024 @60 Hz Excellent Excellent Excellent Fair Fair Poor
1600×1200 @60 Hz Excellent Excellent Fair Fair Poor Poor

Technical Specifications:

 

Power: 9V DC 30 mA (Adapter included)
Power Connector: 3.5mm Outer, 1.3mm Inner, Center Positive
Power Requirements: Power needed at one end, either end.
Video Input/Output

Signal Type: Analog VGA/RGBHV
Connectors: DH15 Male, RJ4508 Female
Nominal Level: 0.7v pp
Minimum/Maximum Levels: 0.3v to 5v pp
Sync: TTL Compatible + or – polarity
Size: Metal housing .95″ h x 1.15″ w x 2.5″ d
VGA Cable Length (approx.): 6 Inches
Shipping Weight: 2 lbs

 

Additional information

Weight 1.05 lbs

Content missing