Converter and Case for external hard drive (Drive not included) – IDE 5.25 Inch

$62.10

Converter and Case for external hard drive (Drive not included)

Description

Comes with a 50W power supply, converts from USB to IDE.
Other enclosures available;

ADP3146 IDE to USB 3.5 Converter
ADP3148 IDE to USB 5.25 Converter


Special Note: USB Drivers come with the operating system and have to be loaded when the computer boots up. As a result, no USB devices can be used until after boot up. It is not possible to boot from an external CD-ROM or hard drive connected through a USB port. Also, if booting up requires a keystroke, the keyboard connected through a USB port would not work for this. A keyboard would need to be connected to the regular keyboard port for this.

USB Notes:

  • USB peripherals can connect either to a computer’s port or to a hub.
  • If the computer doesn’t have enough ports for all the peripherals, a hub is necessary.
  • Maximum length on individual cables is 5 Meters.
  • No terminators are needed on this bus.
  • The A (flat) type port would be considered the “out” port on a computer or hub.
  • The B (square) type port would be considered an “in” port on hubs or peripherals.
  • A typical USB “out” (Type-A) port can provide up to 500mA.
  • The speed is 12 Megabytes per second for USB 1.1 or 480 Megabytes per second for USB 2.0, the maximum number of peripherals to a controller is 63 (hubs needed when the computer runs out of ports).

Additional information

Weight 3.95 lbs