28 Gauge 25 Pair Twisted Pair .05 Inch Pitch Ribbon Cable

Description

This ribbon wire works for mass termination. The twist and flat structure allows the signal to go a few feet further then on a regular flat ribbon. Exact distances will vary with type of signal. The flat sections are 8 inches apart. Connector spacing will be in multiples of 8 inches.

Impedance	Capacitance	Conductor size
115 ohms	16 pf/ft	28 AWG (7×36)

The connectors typically used on this wire are ID50F and/or CE50F. This ribbon cable is .05 inch pitch, a typical connector would be two row .1 inch pitch, see CAB050-RI for .05 pitch economy flat unshielded ribbon with same number of conductors, CAB050-RSR for a .05 inch pitch ribbon bundled in a round shielded jacket, CAB050-RM for a 1mm pitch (about .04 inch) ribbon with same number of conductors, or CAB050-RH for .025 pitch (double density) ribbon with same number of conductors.